Grassland Tillage Ploughs

SERVO 25

SERVO 35

SERVO 35 S

SERVO 45

SERVO 45 S

SERVO 6.50 Stubble cultivators Disc harrow Rotary harrows Drilling technology

New to the range What the Experts Say Downloads

Ploughs

SERVO 35 S

For a difficult and permanent use

Types

Technical data

	SERVO 35 S - 4 furrow	SERVO 35 S - 5 furrow (4+1 or 5)	SERVO 35 S - 6 furrow (5+1)
Beam dimensions	120 x 120 mm	120 x 120 mm	120 x 120 mm
Under beam clearance	80, cm	80, cm	80, cm
Interbody distance	95 102 cm	95 102 cm	95 cm
Leg dimensions	80 x 30 mm	80 x 30 mm	80 x 30 mm
Body spacing and furrow widths	95 (30-35-40-45-50) 102 (32-38-43-48-54) cm	95 (30-35-40-45-50) 102 (32-38-43-48-54) cm	95 (30-35-40-45-50) cm
Weight	1259 kg	1386 kg	1664 kg

	SERVO 35 S nova - 4 furrow	SERVO 35 S nova - 5 furrow (4+1)
Beam dimensions	120 x 120 mm	120 x 120 mm
Under beam clearance	80, cm	80, cm
Interbody distance	88 95 102 cm	88 95 cm
Leg dimensions	80 x 30 mm	80 x 30 mm
Body spacing and furrow widths	88 (28-32-37-42-46) 95 (30-35-40-45-50) 102 (32-38-43-48-54) cm	88 (28-32-37-42-46) 95 (30-35-40-45-50) cm
Weight	1443 kg	1604 kg

	SERVO 35 S plus - 4 furrow	SERVO 35 S plus - 5 furrow (4+1)
Beam dimensions	120 x 120 mm	120 x 120 mm
Under beam clearance	80, cm	80, cm
Interbody distance	95 102 cm	95 102 cm
Leg dimensions	80 x 30 mm	80 x 30 mm
Body spacing and furrow widths	95 (23-49) 102 (25-54) cm	95 (23-49) 102 (25-54) cm
Weight	1324 kg	1579 kg

	SERVO 35 S plus nova - 4 furrow	SERVO 35 S plus nova - 5 furrow (4+1)
Beam dimensions	120 x 120 mm	120 x 120 mm
Under beam clearance	80, cm	80, cm
Interbody distance	95 102 cm	95 cm
Leg dimensions	80 x 30 mm	80 x 30 mm
Body spacing and furrow widths	95 (23-49) 102 (25-54) cm	95 (23-49) cm
Weight	1591 kg	1823 kg

Dimensions and weights are subject to change due to ongoing technical development, and vary from country to country.

Standard Equipment

SERVO 35 S

Mounting option	3 point linkage with cross shaft
Mounting category	Cat. III / Width 2
	Cat. III / width 3 on 6-furrow
Solid mould boards	27 W 3L 36 W 36 UWc 39 UW 3L 41 W 46 Wc 46 Wd
Point type	Share with reversible chisel point 18''
Working width adjustment	Mechanical; 5-hole setting
Interbody distance	95 cm
Under beam clearance	80 cm
Hydraulic connection	1 x double-acting
Standard equipment includes	Tools Landside protection plate at last furrow
Note relating to equipment	Alignment cylinder on 6-furrow as standard.

SERVO 35 S nova

Mounting option	3 point linkage with cross shaft
Mounting category	Cat. III / Width 2
Solid mould boards	27 W 3L 36 W 36 UWc 39 UW 3L 41 W 46 Wc 46 Wd
Point type	Share with reversible chisel point 18''
Working width adjustment	Mechanical; 5-hole setting
Trip leg mechanism	Hydraulic NON-STOP overload protection
Interbody distance	95 cm
Under beam clearance	80 cm
Hydraulic connection	1 x double-acting 1 x single-acting
Standard equipment includes	Tools Landside protection plate at last furrow

SERVO 35 S plus

Mounting option	3 point linkage with cross shaft
Mounting category	Cat. III / Width 2
Solid mould boards	27 W 3L 36 W 36 UWc 39 UW 3L 41 W 46 Wc 46 Wd
Point type	Share with reversible chisel point 18''
Working width adjustment	Hydraulic; stepless
Interbody distance	95 cm
Under beam clearance	80 cm
Hydraulic connection	2 x double-acting
Standard equipment includes	Tools Landside protection plate at last furrow

SERVO 35 S plus nova

Mounting option	3 point linkage with cross shaft
Mounting category	Cat. III / Width 2
Solid mould boards	27 W 3L 36 W 36 UWc 39 UW 3L 41 W 46 Wc 46 Wd
Point type	Share with reversible chisel point 18''
Working width adjustment	Hydraulic; stepless
Trip leg mechanism	Hydraulic NON-STOP overload protection
Interbody distance	95 cm
Under beam clearance	80 cm
Hydraulic connection	2 x double-acting 1 x single-acting
Standard equipment includes	Tools Landside protection plate at last furrow

Technical highlights

SERVOMATIC setting system

The right setting:

Adjust front furrow width using the rear turnbuckle: If the front furrow width is too narrow, extend the turnbuckle. If it is too wide, shorten the turnbuckle.
Adjust the pulling point using the front turnbuckle: If the tractor pulls towards the ploughed field – extend the turnbuckle - lower links move towards the ploughed field. If the tractor pulls towards the unploughed field - shorten the turnbuckle - lower links move towards the unploughed field. The front furrow width does not change when the pulling point setting is changed.

SERVOMATIC control center for SERVO standard plouhgs

It’s unique

Front furrow width and pulling point are adjusted separately with ease and precision. The two functions do not influence each other; no need for corrective adjustment. A few simple adjustments and the plough is set correctly the first time.
The wide, infinitely variable range allows rapid setting for all conditions. Optimum pulling point adjustment guarantees low landside pressure, giving less wear and low fuel consumption.

Turnbuckles with antitwist locks allow easy, accurate plough setting.

SERVOMATIC control center for SERVO ploughs with Plus hydraulic furrow width adjustment

EXACT

Reversing unit with furrow-width adjustment
Fine adjustment gives unique, 100% basic adjustment to varying tractor lower linkage dimensions.
Made from tempered cast steel.

Turnbuckles
with antitwist locks

PLUS unique setting technology

SERVO Plus also enables the basic adjustment to be matched with precision to the various lower linkage dimensions of different tractors.
With furrow width adjustment - 100 % accuracy for first body furrow widt and 100 % accuracy for drag point - there is never any side traction.

Optimum match to ploughing requirements. Correct ratio from working width to working width - best match to tractor performance.
Wide winter furrow in dry soil saves time and fuel (up to 30 %) and reduces wear due to slow travel. Larger clods on the surface with good effect from frost.
Narrow seed furrow in heavy, moist soil. Minimises slipping and delivers a fine-crumbled seed furrow.

Best match for slopes: Narrow uphill, wide going down
Straightforward ploughing along the field edge
Optimum fenceline ploughing even with three furrows
Simply plough around obstructions
Tight corners are easier to plough and bent furrows can be straightened.

Variable adjustment
On the SERVO Plus system the forces on the adjustment mechanism are very low so that the furrow width can be adjusted during ploughing.

Hydraulic cylinder is fitted with check valve as standard, hoses not under pressure during ploughing
All coulters and skims are adjusted automatically

EXACT

Wear bushes
All bearings can be lubricated.
Critical bearings are fitted with wear-resistant, replaceable bushes.

Special lever system
Low adjusting force required due to long lever 1.
Protects the lever system and bearings.

Memory cylinder
is optional. One cylinder for 2 functions: Beam pivot system and furrow width adjustment. First of all the beam is pivoted and rotated - then it pivots back to its original setting again automatically. Simple, low maintenance.

NOVA trip leg system

Indirect triggering

The triggering pressure on this system is cleverly controlled: the leg does not trip until the set resistance has been reached. The pressure required to trigger the leg then goes down the higher the leg moves upwards. This protects the whole plough.
As the share penetrates the ground again the pressure increases, which is important on heavy, dry ground.
Each pair of plough bodies has its own hydraulic accumulator.

NOVA-unit for SERVO 25 to 65 Rides upwards and pivots to the side up to 40 cm. Lubricated bearings and additional shear bolts guarantee a long service life.	Hydraulic trip leg system The hydraulic NOVA system enables the plough to be adapted to different types of soil by adjusting the hydraulic triggering pressure.	Spring-mounted disc coulter This degree of movement allows the disc to roll over rocks without risk of damage.

RELIABLE

Centralised topping up
Standard feature from SERVO 35 onwards.
The triggering pressure can be adjusted quickly and easily from a central point.
Preload pressure can be read at pressure gauge.

Gas accumulator
is mounted on inside for protection. One accumulator for each body.

SERVO Intelligent electronical plough

PLOUGHING WITHOUT LEAVING THE CAB ...

Highly cost effective and user friendly

Huge time savings changing settings between jobs

Automatic drag point setting

The first time the plough is fitted to the tractor, all you have to do is enter the track width and the leading furrow width. The plough is always set correctly
Optimising the drag point: Best drag point -> lowest landside pressure


The best drag point in centre lower drag resistance less wear saves fuel	drag point on furrow side landside pressure too low poor tracking	drag point on landside landside pressure too high more wear

Advantages for the customer
All hydraulic cylinders are fitted with sensors that indicate their exact positions to the computer which then displays them accordingly on the console.

The following functions can be set electronically using the terminal:

Leading body - furrow width
Furrow width - simply plough round obstacles using precision settings
Working width can be adjusted cm for cm.
The memory function is also controlled by the computer.
Drag point
Reversing
Plough beam angle - just change the angle while ploughing; on slopes for example.
Working depth - you can change the depth while in motion.
Trip leg pressure - the pressure can be adjusted from the terminal on NOVA ploughs
Transport setting

PERFECT

Infinitely-variable adjustment
working depth adjusted by hydraulic cylinder on depth wheel.

Ergonomics
The terminal can display the current settings and overall performance data.

Leading body
Furrow width
Drag point
Reversing
Plough beam angle
Working depth
Trip leg pressure.

Ideal plough body shapes

Different soil conditions require different plough body shapes.
They have to be easy to pull, and deliver the best results.
A wide range of modern bodies provides the right shape for every type of soil. All bodies can be mounted on any SERVO plough.


	30 UWS slatted boards Small version For shallow ploughing Clean furrows Best possible crumbling properties
	35 WSS slatted boards proven a thousand times over many years low drag, specially suitable for heavy, sticky soil For working depths below 30 cm Especially wide furrows for use with wide tyres Excellent crumbling properties
	38 WWS slatted mould board NEW Plough body for medium to heavy soil: loam, clay, etc.
mould boards
	27 W mould board NEW Especially suitable for working on slopes. Plough body for shallow ploughing. Wide furrows.
	36 UW Universal body Very clean furrows Ploughs in high quantities of trash no problem Excellent crumbling properties Low drag, and suitable for almost all soil types
	36 W Long body Sleek and curved For soil with high quantities of loam and clay Best results on light soils too Extended body for high working speeds without casting up harvest trash
	39 UW Universal body Suitable for wide tractor tyre dimensions due to its especially wide furrow clearance For working depths up to 38 cm Excellent crumbling properties low drag, for virtually all soil types
	41 W Long body Sleek and curved For soil with high quantities of loam and clay Best results on light soils too For high working speeds without casting up harvest trash
	46 W mould board NEW Wide furrow for wider tyres. Best crumbling effect and excellent performance on slopes.

Plough body shapes

Reliable decomposition of harvest trash feeds life back into the soil and is a critical factor in contributing to yield.
Only trash that has been ploughed in neatly will not cause problems during subsequent passes.
SERVO bodies fulfil all requirements, as years of field tests have proven regarding the reliability and service life of the materials.

ROBUST

Plate thickness
8 mm thick fine-grain steel hardened right through - extremely wear resistant

Slatted mould boards
Lower drag resistance due to smaller effective surface area.
Slats are swept away conically at rear so that stones cannot become trapped.
10 mm thick slats hardened right through - extremely wear resistant.

Pöttinger analyses each mechanical wear scenario in practice before coming up with a diagnosis and then recommending the necessary design improvements.

Hardened right through
The new heat treatment system enables the mould boards to be fully hardened (a transformation of the microstructure) -> through the whole thickness of the board. Much more resistant to wear than conventional three-layer mould boards.
The mould boards are of fine-grained boron steel and are 8 mm thick.

Detailed information

The lighter plough category is extended
The SERVO 35 S series is added to the mounted plough product family. Ploughs with 4 to 6 furrows and a robust, 4.72x4.72 in / 120x120 mm frame tube, designed for tractors up to 125 kW/170 HP.

Servo 35 S

The user has the choice of 3.1/3.3 ft / 95/102 cm for the body clearance, depending on conditions. Five different furrow widths are possible by making manual adjustments. SERVO 35 plus ploughs are hydraulically adjustable.
A large headstock with a powerfull hydraulic ram ensures turning is safe and
smooth. An additional backbone (bolted inner brace) in the area of greatest beam loading strengthens the plough beam.

New advanced pendular depth and transport wheel
The pendular depth wheel is hydraulically damped and consequently swings backwards smoothly. Two spindles are used to adjust the depth on the mechanical version. The comfort version provides hydraulic adjustment from the tractor seat. The wheel can be converted into the transport wheel with just a few simple adjustments.

Hydraulic pendular depth and transport wheel

News

30.09.2011
New brochure: SERVO-ploughs
Mounted ploughs

Successful arable farming depends mainly on three factors: cost-effectiveness, ground protection and intelligent agricultural technology. Pöttinger covers all three aspects with the SERVO range of ploughs. The latest 36-page brochure provides an overview of all models, applications and technical details. There is also plenty of coverage given to modern synthetic mould boards for every type of soil.

PDF-document

PÖTTINGER SERVO-Ploughs

36 pages
4.7 MB

Read and find out more in the pdf-document.

Images/Videos

Image gallery

SERVO 35 S
Press image (high res.)

SERVO 35 S Plus
Press image (high res.)

SERVO Einstellzentrum
Press image (high res.)

Videos

	SERVO Pflüge Online Video, 7:06 min.
	BODEN und SAAT Video SERVO, LION, SYNKRO, TERRADISC und Sämaschinen Online-Video, 5:27 min.
	SERVO 6.50 Aufsattelpflüge Online Video, 4:58 min. Ein Video von www.landwirt.com
	SERVO 45S Online Video, 4:41 min. Ein Video von www.landwirt.com

Brochures

SERVO Mounted ploughs
36 pages [97+210.02.0911]

File size: 4.748 KB

Text:
Salutation*:
First name/Last name*:
Street*:
ZIP City*:
Country:
Phone*:
Job*:
E-Mail*:
Contact:	Yes, please contact me
Check-Code*:	Reload image
*) Obligate