Stubble cultivators
SYNKRO Cultivator
Economical solution – stability at ist best
Types
|
Technical data
| | SYNKRO 2600 | SYNKRO 3000 | SYNKRO 2600 S | SYNKRO 3000 S | | Working width | 2,6 m | 3 m | 2,6 m | 3 m | | Tines | 6 pcs. | 7 pcs. | 6 pcs. | 7 pcs. | | Leg dimensions | 70 x 25 | 70 x 25 | 70 x 25 | 70 x 25 | | Tine spacing | 43 cm | 43 cm | 43 cm | 43 cm | | Row spacing | 75 cm | 75 cm | 75 cm | 75 cm | | Concave discs | 5 pcs. | 6 pcs. | 5 pcs. | 6 pcs. | | Beam dimensions | 80 x 80 mm | 80 x 80 mm | 100 x 100 mm | 100 x 100 mm | | Under beam clearance | 75 cm | 75 cm | 82 cm | 82 cm | | Triggering pressure on stone protection system | 500 kg | 500 kg | 500 kg | 500 kg | | Clearance height | 22 cm | 22 cm | 22 cm | 22 cm | | Power requirement | 70 hp | 90 hp | 80 hp | 120 hp | | Transport width | 2,6 m | 3 m | 2,6 m | 3 m | | Weight with cage roller Ø 540 mm | 761 kg | 975 kg | 881 kg | 1085 kg | | Weight with ROTOPACK | 844 kg | | 964 kg | | | Weight with trailed ring press | 1000 kg | 1130 kg | 1120 kg | 1240 kg |
Dimensions and weights are subject to change due to ongoing technical development, and vary from country to country.
|
|
Standard Equipment
SYNKRO | Mounting | Rear 3-point linkage
| | Mounting option | 3 point linkage with cross shaft
| | Mounting category | Cat. II / Width 2
| | Working depth | 6 - 20 cm
| | Point type | Double diamond point with wings
| | Concave discs | Smooth
| | Standard equipment includes | Mounting for rear roller
|
|
Technical highlights
Trailing rollers for all soil types
| |
Roller versions and applications
| Type |
Diameter
(inch / mm) |
Use on
moist soil |
Use on
soil type |
| dry |
medium |
moist |
light |
medium |
heavy |
| Cutting ring roller |
23.6” / 600 |
● |
● |
|
|
● |
● |
| Cage roller |
21.3” / 540 |
● |
● |
|
● |
● |
|
| Double cage roller |
16.5” / 15” / 420/380 |
● |
● |
|
● |
● |
|
| Pack ring roller |
21.7” / 550 |
● |
● |
● |
● |
● |
● |
| Pendular Rotopack |
10.6” / 8.5” / 270 / 215 |
● |
● |
● |
● |
● |
● |
Cutting ring roller
The advantages of the cutting ring roller (24” / 600 mm diameter) include enhanced crumbling and compression by means of wedge-shaped rings. The blades between the rings crush the lumps of earth and also clean the spaces between them. Compression in strips has the advantage that water can be absorbed better. The correct choice for dry, difficult soils.
Cage roller
The ideal roller for dealing with dry, non-sticky soils.
The roller is fitted with twelve strong rods for optimal
compression. Diameter 21” / 540 mm.
Double cage roller
The double cage roller is fitted with different diameters(16.5” / 420 mm front and 15” / 380 mm rear). The pendular function ensures optimal crumbling and adjustment to the contours of the ground..
Pack ring roller
The shoulder rings have a diameter of 22” / 550 mm, and there are eight rings per metre of working width. The roller leaves behind consolidation in strips, promoting water absorption and soil respiration. This is the ideal roller for stony, damp soil conditions and large quantities of organic material.
Rotopack and Pendular Rotopack
Two aggressive tine rotors that reach into each other, crumble and mix particularly well. Each rotor consists of a central tube. The front rotor has a diameter of 11” / 270 mm, the rear rotor 8.5” / 215 mm (tine external diameter is 24” / 600 mm and 21.5” / 545 mm). The pendular suspension ensures the best adaptation to any unevenness of the terrain. Rotopack rotors mix particularly intensively – for light to heavy, non-sticky soils. Harvest residues remain on the surface of the soil and protect the soil against drying.
|
|
DISCS
Harrow discs smooth over and provide a consistent finish. The discs are bolted behind the tines onto an extra beam and can be adjusted in pairs. The ensure that there is no clogging. The discs tear apart any uneven patches and automatically redistribute the soil due to their offset configuration.
Side discs can be folded upwards (optional extra), to prevent ridges.
|
Tines and trip leg system
| |
Tine shape
1. goose-foot blade with quick-change system
2. narrow blade with quick-change system
3. twin heart blade with combined mulch-wing blade
4. chisel blade with combined mulch-wing blade
- Spread-wing share – works in evenly and thoroughly churns up mulch, manure and clay.
- Good crumbling, loosens over the whole area, always cuts right through.
- Wide bar point shares improve the mixing through of the soil.
- Reversible and can be reset so that it obtains 3 times the normal service life.
- Spread-wing shares and chisel bar points have a thickness of 10 mm – longer service life, better economy.
- End share faces inwards to guide the flow of soil inwards. Prevents ridges from forming.
 |
Tough tines with angle adjustment:
- A choice of 3 positions can be used to optimise penetration and the effect of the cultivator to the soil conditions – no problem on extremely dry, hard soil.
- Tines with trip legs have 2 positions.
|
Trip leg system – obstacles no problem
 |
- Reliable triggering on contact with obstacle
- The high path of deflection guarantees smooth operation.
- The triggerin pressure is adjusted to a specific triggering torque.
- The trip leg system can be retro-fitted at any time.
- Frame and configuration is the same as on standard cultivators
- "Non-Stop cultivation" even on ground with a rocky subsoil.
|
|
|
SHARES
Flat shares for especially smooth ground. Double diamond share with very flat wings for wide coverage, especially for working depths between 5 and 6 cm.
Share carrier, spreadwing share and bar point share are bolted to the tine leg so that they can be replaced independently quickly and easily.
|
DRILLBOX - Catch crop seed drill
| |
Add-on accessory for extra cost effectiveness:
- For all crops and seed mixtures.
- Lever for rough setting, throttle knob for fine control.
- Feed flap adjusts to size of seed.
- Special scatter plate for providing even distribution over the whole working width. Best possible distribution even on slopes.
- Agitator can be fitted as an option for seed mixtures.
- Unit is driven using a large diameter spur wheel and drive chain
- Catchment tray provided for calibration
- Universal application up to a working width of 3 , in front or behind the trailing roller
Models:
- Drillbox 200: 6 outlets, 115 kg
- Drillbox 230: 7 outlets, 125 kg
- Drillbox 260: 8 outlets, 135 kg
- Drillbox 300: 9 outlets, 155 kg
|
|
METERING
Filling is easy and effortless – low filling height
Bevel toothed metering whell for continuous seed flow
Large spur wheel - Provides reliable transmission to the metering unit.
|
|
|
Detailed information
Headstock
- two support struts to rar
- several positions for the top link pin – best possible match to the tractor
Mounting bar
- solid design, single-piece
- 2 positions possible depending on the size of the tractor tyres – standard tyres – standard tange Cat. II or III
Heavy duty frame
- made of micro-alloyed fine grain steel, wide gap between tines, spacing of 43 cm
- High frame clearance ensures clog-free operation even with large quantities of harvest trash.
SYNKRO 2600 with ROTOPACK trailing roller and DRILLBOX
Images/Videos
Brochures
deutsch
english
français
español / latino america
italiano
český
slovak
polski
dansk
suomi
українська
pусский
north america
SYNKRO Cultivator
